Thursday, October 4, 2012

FITTER & MODULAR SEMI SKILLED @ ODF MEDAK


GOVERNMENT OF INDIA, MINISTRY OF DEFENCE
ORDNANCE FCTORY MEDAK
YEDDUMAILARAM, MEDAK DIST – 502205
ANDHRA PRADESH

EMPLOYMENT NEWS ADVERTISEMENT NO. DAVP/10201/11/1550/1213 DT. 29 SEP. TO 05 OCT.2012

IMPORTANT DATES:

01 Opening Date for ON-LINE application/registration on website  29/09/2012
02 Closing Date for ON-LINE application/registration on website 25.10.2012 23:59 Hrs
03 Last date of receipt of APPLICATION FEE through Demand Draft, application form 10.11.2012


ORDNANCE FACTORY,YEDDUMAILARAM,MEDAK invites ON-LINE application from the eligible
Citizens of India for filling up the following vacancies in Group ‘C’ Industrial Establishment (IE). The candidates, who are fulfilling the requisite qualifications/specifications as mentioned below, may apply ON-LINE through www.ofmedak.gov.in

Age : 18-32

Essential Qualification Matriculation or its equivalent and National Council of Trades for Vocational Training (NCTVT) certificate {i.e., National Apprentice Certificate (NAC) or National Trade Certificate (NTC) in the relevant trade failing which by I.T.I or its equivalent Diploma/Certificate for the posts .


NOTE: The Degree and Diploma in Engineering will not be accepted as basic qualification for Direct Recruitment.


Application Fees An application Fee of Rs.50/- (Rupees Fifty only) to be paid through Demand Draft only. In favour of THE GENERAL MANAGER,ORDNANCE FACTORY, YEDDUMAILARAM,  MEDAK. However, Candidates belonging to SC/ST/PH/Ex-Servicemen and Ex-TA of OFMK/ Yeddumailaram and Sangareddy employment exchange sponsored candidates(who will get the letters from O.F.Medak) are exempted from paying application fee. The application fee is non refundable.


SCHEME OF EXAMINATION
The selection will be made purely on basis of merit obtained by the candidate in Written
Examination. The Selection process will comprise of:
(A) The question papers of Written Test will be Trilingual ie., English, Hindi and Telugu.
(B) The selection process shall comprise of Written Test of 100 marks and Trade Test (practical).
(C) Written Test shall be fully objective type and OMR based.
(D) The Trade Test (Practical) shall be only qualifying in nature, without any marks.
(E) On the basis of merit list based on marks obtained in Written Test, candidates @ 1.25 times the number of vacancies shall be called for Trade Test (Practical).
(F) WRITTEN EXAMIATION : The syllabus for the Written Test will be broadly as that of the NCTVT
Examination syllabus prescribed for the respective trade and as per the functional requirement of
the trade.
(G) TRADE TEST : The syllabus for Trade Test (Practical) will be as per Trade Test Specification of the
Semi-Skilled grade of the relevant trade.


TRADE TEST SPECIFICATION FOR FITTER (GENERAL) SEMI-SKILLED GRADE
i) Ability to start and stop the compressor, Pumps & Motors, carry out routine lubrication, observe pressure gauges ,take meter reading, control water temperature where necessary.
ii) Ability to detect minor running faults with the compressor motor and pumps in his charge.
iii) Ability to distinguish between compressor oils and other oils.
iv) Ability to pack glands in the pumps and elementary working knowledge of centrifugal pump or ram pumps.
v) Ability to use file and chisel to carry out simple hand operations such as filing, tapping, sawing, screwing, chipping etc., to the tolerance considered reasonable for such operation.
vi) Ability to estimate correct length of rivets required and to set up rivets hot or cold by hand or pneumatic hammer and should have working knowledge of various types and uses.
vii) Ability to use scraper / chisels for the purpose of removing scales marks, line scores and small dents from components or raw material, bringing these into a condition suitable for inspection.
viii) Ability to grind simple tools, scrapers, chisel etc., for own use.
ix) Ability to read simple drawings and mark off correctly the centre of holes to be drilled and straight lines on the components with appropriate tools including vernier / height gauge etc., for carrying out simple operations such as drilling shaping, planning or drilling and boring.
x) Ability to take simple measurement direct from existing plant or store and transcribe them to a fresh components.
xi) Ability to carry simple assembly jobs of repetitive nature and should have knowledge of various components used in a particular store under assembly.
xii) Ability to read simple Blue Prints or take measurement using a foot rule and calipers (internal
and external).
xiii) Ability to carry out simple fitting operations such as fitting, chipping, reaming, tapping or screw cutting by hand taps and Dies.
xiv) Elementary ability to use simple workshop machines such as that required for drilling and rough grinding on emery stone.
xv) Ability to read micrometer and vernier and other suitable instruments normally connected with this trade.
xvi) Must have elementary knowledge of refrigeration compressor, blower and other equipment
in air –conditioning plants, Ability to start and stop air conditioning and in proper sequence.
xvii) Ability to read volt meter, thermometer, hydrometer and record pressure temperature, relative humidity etc.,

xviii) Ability to carry out minor repair of refrigeration compressor, cooling tower, blowers, desealing of compressor tubes, chilled water system of AC plant and inter cooler of air compressor using de-sealing compounds.
xix) Ability to detect leakage of refrigerant in air conditioning plant and take measures to prevent loss of refrigerant from the system.
xx) Must carry tools, spare parts and job pertaining to his own work weighing 20 kgs (approx).
In addition to these ability to carry out any other work of similar nature.



TRADE TEST SPECIFICATIONS FOR MOULDER SEMI-SKILLED GRADE
i) Ability to check, clean, apply mould dressing mixture to cast iron, moulds, assemble and fit the moulds. Ability to knock out moulds and strip castings.
ii) Knowledge about various grades of sands and binders. Ability to prepare sand to the required proportion for making cores and moulds.
iii) Ability to make cores and mould from the patterns.
iv) Should possess preliminary knowledge about risers and runners.
v) Ability to operate die-casting machines and pugging will independently. Ability to fix dies and detect common defects in die-cast component.
vi) Ability to read simple drawing.

TRADE TEST: A practical demonstration to satisfy the above requirements and an oral examination.


Final merit will be decided on the basis of written test. In the selection process, other things being equal ie., marks being equal, trained Ex-Trade Apprentices of the recruiting Ordnance Factory and Sister Ordnance Factories shall be given preference in the order in which they are placed. In between the trained Ex-Trade Apprentices of the recruiting factory, preference shall be given to those who are senior i.e., if two or more Ex-Trade Apprentices secure the same marks then preference shall be given on the basis of seniority. Similarly, in between the trained Ex-Trade Apprentices of the Sister Ordnance Factories, preference shall be given to those who are senior as mentioned above. In all other cases of tie, the selection will be decided on the basis of marks obtained in the Written Examination only.


The applicants should keep visiting OFMK Website www.ofmedak.gov.in for important  announcement/ information throughout the selection process at its various stages including downloading of hallticket.

Click Here To Download Complete Details
Click Here To Apply Online








No comments:

Post a Comment